Bathroom vanity light

SR-2026-056 · Lighting · Vanity light · July 2026

Two vanity lights — a damp-location product, so the gasket and the finish were checked before anything else.

RecordSR-2026-056

MarketUnited States

BeltZhongshan (Guzhen)

CategoryVanity light

Quantity2 pcs

Cartons2

ClientUS kitchen and bath retailer

Dispatched2026-07-31

Specification as orderedVanity bar fixture with a mirror light; wall-mounted

Receiving photographs

Bathroom vanity light as received at the consolidation warehouse — **As received.** The lot on the dock before anything is opened — counted against the packing list and checked for carton damage first, because a claim on transit damage has to be raised before the goods are moved.

Bathroom vanity light — Opened on our floor — **Opened on our floor.** The first carton of the lot is opened in full. One unit is assembled or powered up as the client will use it, and compared against the approved sample rather than against the catalogue photograph.

Bathroom vanity light — Fittings and hardware — **Fittings and hardware.** Hardware, fixings and loose components are checked against the parts list before the carton is resealed — a missing bag of fittings is a return on arrival, not a spare part.

Photographs taken at our consolidation warehouse as the lot was received and checked. Container numbers, shipping labels, supplier marks and brand markings are masked; the lot is shown as it arrived, not restyled.

How this order was run

Placed the order against the same finish and the same board or fabric family the client had bought before, so a reorder would match the previous lot.
Recorded the finish code, the dye lot and the carton specification against the order file — that record is what makes the next reorder a repeat instead of a new development.
Inspected the incoming lot against the previous shipment's photographs, not only against the approved sample.

What was checked at receiving

This is the vanity light check sheet — the same list every order in this category goes through before the container is released.

Every unit in the inspection set powered and run at the destination voltage, not at 220 V and assumed
Lamp holder, wiring gauge, earthing and plug type checked against the destination market standard
Finish inspected for plating runs and for colour variation between components of the same fixture
Glass and shades inspected for chips at the rim and test-fitted on the holder before boxing
Lead length, switch position and fitting type confirmed against the destination market's expectation

How it was packed

Moulded foam or honeycomb insert per fixture, with glass and shades boxed separately where the shape allows
Corner drop test per lot — glass is what breaks, not the metal
Fixtures of the same model strapped as a block, not loose
Carton marked with model, voltage and quantity for the receiving warehouse

The note

Lighting fails on the electrical check and on glass. Both are settled before the container closes — after that, a fixture that does not light is a return, not a repair.

It is why lighting is inspected powered, at the destination voltage, with the glass test-fitted — a fixture is either right on arrival or it is a return, because there is no field repair in this category.

Other records from the same belt

Lighting · Island lightLinear island light, black, warm whiteSR-2026-045 · June 2026 · 12 pcsRead the record →Lighting · Table lampsTable lamps, four variantsSR-2026-049 · July 2026 · 48 pcsRead the record →Lighting · Floor lampFloor lamp with drum shadeSR-2026-050 · July 2026 · 2 pcsRead the record →

Running an order like this one? Send the product, the quantity and the destination.

Let's Talk All Shipping Records